Progress in recent weekends have been substantial!
Finally I gave a second coat of resin parts which were still completing both hulls, then I made a last hand to scull that remained (including the keel that was lost during the various removals ... boh) and I pasted all.
The main concern I had in doing the bonding of Palella was created that was incredibly hard inside a strip of compromising the flexibility, but it is not, the pieces, once joined, are so long (more than 6 m) that the local effect of the glue does not feel at all and seems to bend the wood as if it were unique.
Palella While I ended up sticking to the hands of lapazze combining the first half of a boat!
Without one was a moment ... and now they are 3 / 4 Labour, now the third hull is joining, I am pasting the sleeper on the second and the first is nice and ready for use.
Another fear was that I had joined the boards were not straight enough, incredible, but it seems that everything fits ... One of two things, or everything is wrong or not so bad!
The temperature began to drop sharply, more or less than about 3 degrees per hour the resin seems to work well, proceed as follows: the mixture under the heat lamp (practically at a temperature of about 25 ° -30 °) and also heated the piece of wood the same way ... for now it works, when will we see really cold! (Sounds better than last year though)
Two or three days to finish the last quarter of the hull and the sleeper and then you can sew, having first ordered a bit 'of resin, however, I am going to stay dry ...!!
